Loading ...
Loading ...
Loading ...
23
CLEANING AND MAINTENANCE
WARNING: the oven and hob must be kept clean, as a build up of fat constitutes of a
fire risk
1. Cleaning of Stainless Steel: In order that your cooker retains its new appearance,
care should be taken to protect the stainless steel finish. Never use gritty or abrasive
sponges. We highly recommend stainless steel cleaners and protectors. Stubborn
stains can be removed by soaking in hot water and stains can be prevented by using
a clean cloth soaked in soapy water before a spillage becomes cold or dries up. Acid
materials like milks, vinegar, citrus juice can damage the most resistant surfaces. If a
spill occurs wipe it up immediately.
2. Oven Cleaning: Oven spills should be cleaned straight away. Leaving them will cause
burning and smoking inside the oven the next time it is used. Leaving spills can also
cause permanent damage to the enamel and make it extremely hard to remove later.
A non-caustic cleaner is recommended such as non caustic “Mr. Muscle” to clean the
chamber of the oven. Do not use abrasive scourers, sponges or cleaning products.
Wipe the oven out regularly while the oven is still warm using hot soapy water and a
soft cloth. The removal of side shelves supports makes cleaning easier.
3. Gas Burners - All models: The burners can be removed from the cooker and cleaned
in hot soapy water. The burner covers are made of cast iron so as soon as they are
cleaned dry burner covers immediately to prevent rusting. Enamelled trivets are also
recommended to be cleaned in hot soapy water or the dishwasher. Make sure all
pieces are completely dry before placing them back onto the cooker.
4. Knobs and Control Panel - All models: All knobs are removable. Clean behind
the knobs and around the control panel to prevent grease and grime build up that
can cause jamming of the knobs/gas taps etc. The stainless steel panel should be
cleaned with stainless steel cleaners, do not use anything abrasive.
5. Cleaning of Oven Door - All models: The inner door glass is held in by a number of
screws and brackets, they can be removed and the glass taken out to allow cleaning
in between the two sheets of glass. The glass can be soaked in hot soapy water or
special glass cleaners. The outer glass should be cleaned with a specific glass and
mirror cleaner. Soapy water will remove stains and but may leave streaks. Do not use
abrasive or aggressive cleaners on aluminium door frame components, if in doubt
contact Glem Gas for advice.
6. Removal of Side Shelf Supports - All models: The sides racks are removed by
simply flexing the bottom rail off the support and unhooking at the top. To replace just
reverse the procedure.
Loading ...
Loading ...
Loading ...