Loading ...
Loading ...
Loading ...
11
OPERATION OF GAS HOB
GAS BURNERS
The combination of high-speed burners with those of a standard type allows all types of
cooking to be achieved.
Burners Locations
53 - 60cm wide models
80 - 90cm wide models
Left back Left front Right front Right back
Auto Flame Ignition - Some models
To ignite any burners simply depress the corresponding control knob and rotate anti
clockwise to the high flame position. As the knob is rotated the gas begins to flow and
the electrode begins sparking.
Separate Electronic Ignition - Some models
To ignite any burners, press ignition button first (the igniter should begin sparking), then
simply depress the corresponding control knob & rotate anti clockwise to high flame
position.
Warning: make sure all the burners are on OFF position (outside the one that you
want to light) before pressing the electronic ignition. Please note - the ignition button is
a spongy & sensitive button and does NOT need to be pressed hard. Pressing hard &
roughly on this button can result in breakage.
In case of ignition malfunction or electricity failure a match can be used to ignite
the burners. Strike a match and place it close to the selected burner. Depress the
corresponding control knob and turn it anti clockwise to maximum flame.
3) Burners with Flame Failure Device - Some models
If flame is accidentally extinguished, the flame failure device will cut out the gas to
prevent gas leakage. To light these burners hold the knob in for a few seconds after the
burner is lit.
Left back Left front Central Right back Front back
Loading ...
Loading ...
Loading ...