Loading ...
Loading ...
Loading ...
3.2 Power on the scanner
Press the Power button to power on the scanner. After powering on, the blue LED light
flashes first and then the Power button displays as solid green. The solid green also indicates
the default resolution to be 300 dpi. To change the resolution, press the Power button
repeatedly until your desired resolution is shown with the corresponding LED light.
= 300 DPI (default when scanner is powered on)
= 600 DPI
= 1200 DPI
.
3.3 Insert your document
Important!
Insert only one page at a time, and insert the next one only when the previous one is
done. Otherwise, the scanner may malfunction.
The paper detector is quite sensitive. Please do not push your document into the
feeding slot or the top of your image will be cut. Simply let go the photo (card) when it
begins to feed into the slot.
1. Insert your document FACE UP to the feeder and align it to the left edge of the feeder.
Then, slide the guide lever against the right side of the original.
Guide Lever
2. Gently push the original into the feed slot, release it as soon as it begins to feed. After
the feed begins, the scanner pauses briefly and then continues the feed.
3. Wait until the indicator light stops blinking before inserting and scanning the next
original.
4. By default, all images are stored in JPEG file format. When the scan is completed, the
scanner will automatically create a folder with its subfolder titled “DCIM\100PHOTO”
on your memory card or flash card, which will hold the first 9999 scans. Then
“DCIM\101PHOTO” folder will be created for the next 9999 scans, and so on.
3-2
Loading ...
Loading ...
Loading ...