Loading ...
Loading ...
Loading ...
B. Usage Situations where Appliance Power Cord will be
Disconnected Frequently,
Do not use an adapter plug in these situations because
disconnecting of the power cord places undue strain on the
adapter and leads to eventual failure of the adapter ground
terminal. The customer should have the two-prong wall
receptacle replaced with a three-prong (grounding) receptacle
by a qualified electrician befbre using the appliance.
The installation of appliances designed fbr mobile home
installation must conform with the Manufactured Home
Construction and Safety Standard, Title 24 CFR, Part 328o
(fbrmerly the Federal Standard for Mobile Home Construction
and Safety, Title 24, HUD, Part 28o) or, when such standard is
not applicable, the Standard for Manufactured Home
Installations, latest edition (Manufactured Home Sites,
Conmmnities and Set-Ups), ANSI Aa25.1, latest edition, or
with local codes. In Canada, mobile home installation must be
in accordance with the current C:_N/CSA Z24o/MH Mobile
Home Installation Code.
Electric Disconnect
Locate disconnect plug on the range back.
Pinch sides of connector and pull out of range back,
4. SEAL THE OPENINGS
Seal any openings in the wall behind the range and in the
floor under the range when hookups are completed.
5. ASSEMBLE SURFACE
BURNERS
A. Assemble the side burners as shown.
Side
Grate
Burnercap
Burnerhead/'Ir_ Electrode
Medium burner
headandcap
(23
@
Largeburner
headandcap
Small burnerhead
and
assembly Small burner
cap
headand cap
€
1 °
Q
Frontof range
Extralarge burner
headand cap
Place the burner caps on the
cooktop. Make sure that the
caps are placed in the correct
locations.
There is two small cap, one
medium cap, one large cap, and
one extra large cap.
Make sure the slot in the burner
head is positioned over the
electrode.
Slo
Electrode
,iiii_i_ii:iii!i!iiiil;!i!iiiilililili!!iii)iiiiiiii
ii_iii:ii:ii:ii:ii:ii:ii:ii:ii:ii:ii:ii:ii:iii!ili_i_ii
iiiii_i!iiiiiiiiiiiiiiiiiiiiiiii!iiii!i
iii
iii
- 47 -
Loading ...
Loading ...
Loading ...