Loading ...
Loading ...
Loading ...
15
POWER
When the D.C. Power cord is connected to the equipment, the console will automatically power up. If there
is no input to the console for 20 minutes the console will go to stand-by mode. In stand-by mode the console
display will turn off. To turn the console on press any key.
When initially powered on the console will perform an internal self-test. During this time all the lights
will turn on. When the lights go off, the Message Center will show the software version (i.e.: VER 1.0).
The distance window shows the distance in miles and the time window shows the total hours of use.
The odometer will remain displayed for only a few seconds then the console will go to the start up
display. The dot matrix display will be scrolling through the different proles of the programs and the
Message Center will be scrolling the start up message. You may now begin to use the console.
Dot Matrix Center Display
Twenty columns of boxes (8 high) indicate each segment of a workout. The boxes only show an
approximate level (resistance) of effort. They do not necessarily indicate a specic value - only an
approximate percent to compare levels of intensity. In Manual Operation the resistance dot matrix
window will build a prole “picture” as values are changed during a workout.
The resistance proles will display half of the program at one time (9 columns). They will both scroll
right to left. The Lap track will move in a counterclockwise direction.
Loading ...
Loading ...
Loading ...