Loading ...
Loading ...
Loading ...
CARE AND OLEANRNG (continued)
Sofid Disk ModuRe
Clean the area surrounding the solid disk elements
according to the Porcelain Finish sections.
Solid Disk Elements
The solid disk elements are made of high strength
cast-iron alloy,
The surface has a heat-resistant coating to pre-
serve the surface of the element. After the unit
cools, any boiled-over material on the elements
should be removed as soon as possible with a slightly
damp cloth. The element should then be dried by
switching on for a few minutes. After it cools, wipe
lightly with cooking oil.
Clean very dirty solid disk elements with a little
cleaning powder (such as Comet '_'cleanser) or with
a scouring pad.
The matte black surface can be maintained by
treating it periodically with Colic Electrol '_'polish
which is available from your Sears supplier. Use the
applicator to apply a very thin coating of the polish to
the entire element surface. Turn the element on high
for several minutes to bake the polish to the element.
When the element is cooled, rub lightly with a cloth or
paper towel to remove any excess polish. Before next
use, burn off the element by means of a short pre-
heating period. A slight amount of smoke and odor will
occur.
Failure to maintain the solid disk elements as
directed will result in defacing the surface over a
period of time primarily due to corrosion, as the ele-
ments are made of cast-iron construction.
Do not use covers over the solid disk elements.
An element turned on while the cover is in place can
permanently damage the cooktop. Covers can also
trap moisture which may cause the elements
to rust.
Radiant Module
Cleaning of glass ceramics different from cleaning a
standard porcelain finish.
To maintain and protect the surface of your new glass
ceramic module follow these basic steps.
DALLY CLEANING:
Use only Cook Top Cleaning Creme on Glass
Ceramic.
For normal, light soil:
1. Rub a small amount of Cook Top Creme onto soiled
area using a dr,:/paper towel. Wipe until all soil and
creme are removed. Frequent cleaning leaves a
protective coating of silicone which is essential in
preventing scratches and abrasions.
2. Clean surface with Cook Top Cleaning Creme after
each use.
.
3,
For heavy, burned on soil:
1. Apply a few drops of Cook Top Cleaning Creme to
the (cool) soiled area.
Using a dry paper towel, rub creme into the burned
on area.
Carefully scrape remaining soil with razor scraper.
Hold scraper at 30 ° angle against the ceramic sur-
face.
4. If any soil remains, repeat the steps listed above.
For additional protection, after all soil has been
removed, polish the entire surface with the Cook
Top Cleaning Creme.
NOTE:
oUsing a razor scraper will not damage the surface
if the 30 ° angle is maintained. Store the razor scrap-
er out of reach of children.
o Be sure to use a new, sharp razor scraper. Do not
use a dull or nicked blade.
3O
Loading ...
Loading ...
Loading ...