Loading ...
Loading ...
Loading ...
GIR DDLE ACCESSORY
You must have the grill module to use the griddle
accessory.
Your non-stick coated griddle provides an extra-large
cooking surface for meats, pancakes, or other food
usually prepared in a frying pan or electric skillet.
,
How to insert the Griddle Accessory and
the Grill Module
1. Make sure the grease
collector jar is in place
beneath the cooktop.
2. Fit the reflector pan
in the cooktop. The
slots in the pan per-
mit grease to drain
into the jar. Keep
the slots open at all
times.
3. Make sure all controls
are turned to OFF.
Hold the heating unit
with the plug facing
the side of the cook-
top and level with the
surface. Insert the
plug into the cooktop
outlet as far as it will
go. (Do not force.)
The heating unit support should rest on the ledge
of the reflector pan.
4. Place the griddle plate _
on the reflector pan
over the heating unit. f_/! _
The plate should be /_i:/y/_, _/_
heated properly on the _// ,__f_ ./
reflector pan with the _, "__"
griddle s drain holes at
the front, y
Removing the Griddle Module
When removing the parts of the grill module to clean,
be sure all switches are in the OFF position and the
unit is cool. Remove the griddle plate and then slide
the heating unit toward the center of the cooktop until it
is unplugged. Remove the reflector pan. Empty grease
collector jar when cool. Be sure to replace the jar.
Using the Griddle
The non-stick griddle must be preconditioned
before using it for the first time. To precondition,
first wash the griddle in soap and water and dry. Then
use a paper towel to apply a small amount of cooking
oil to the griddle. Remove excess oil with a clean
paper towel.
Preheat the griddle as recommended in the Griddle
Cooking Guide. After preheating for the recommended
amount of time, apply a small amount of oil or butter.
Do not over heat the griddle. Leaving the griddle at
HI for more that 5 minutes without food can damage
the non-stick coating.
Because the heating element under the griddle is
divided, you can vary the temperature of the front and
rear sections,
How to Set the Griddle Controas
The control knob must be
pushed in to turn; this pre-
vents the heating unit from
being turned on accidental-
ly. Push the knob in only
when it is in the OFF posi-
tion. When the knob is in
any other position, it can be
turned without pushing it in.
Front and rear units of the griddle heating unit are
controlled separately. Heat only half the griddle sur-
face for cooking small portions or set each half at a
different temperature for cooking different types of
foods.
Push in the control knob depending on which side of
the cooktop griddle module is used. The right front
and right rear control knobs control the griddle when
the module is on the right side (on some models).
The left front and left rear control knobs operate the
griddle when the griddle module is on the left side of
the cooktop.
24
Loading ...
Loading ...
Loading ...