Loading ...
Loading ...
Loading ...
Usingthesurfaceunits.
HI
1 9
8
3 7
4 i
Be sure you turn the control knob to
OFFwhen you finish cooking.
How to Set
Push the Mlob in and turn in either
direction to the setting you want.
At both OFFand HI the control
clicks into position. You may hear
slight clicking sounds during cooking,
indicating the control is keeping the
power level you set.
A HOTSURFACEindicator light, on file
cookmp, will glow when any radiant
element is turned on. It will remain
on until the surface is cooled m
approximately 150°E
Hotsurfaceindicatorlightwill:
comeonwhentheunitishottothetouch.
stayonevenaftertheunitisturnedoff.
glowuntiltheunitiscooledtoapproximately
150°E
FRONT
Using the Bridge Burner (on some models)
To use the bridge burnei; turn the
left flont conuol knob m the BRIDGE
BURNERsettings.
For full bddge surface unit operation,
also turn on the left rear surface unit.
To use only the flont surface unit, turn
the control knob to the FRONT BURNER
set6ngs.
Tri-Ring Surface Element (onsome models)
Thefrontrightsurfaceebmentoffers3 cooking
areastomatchthesizeofthecookwareyou
areusing.
To use the laIgest cooking area, push in
and turn the SELECTORMlob to 12".Push
and turn the control knob to the desired
setting.
To use the medium cooking area, press
and turn the SELECTORMlob to 9". Push
down and turn the control knob to the
desired setting.
To use the smallest cooking area, turn
the SELECTORknob m 6". Push and turn
the control Mlob m the desired setting.
This will activate only the smallest inside
hea6ng area.
8
Loading ...
Loading ...
Loading ...