Loading ...
Loading ...
Loading ...
Careand cleaningoftherange, g,oom
Be sure all controls are off and all surfaces are cool before cleaning any part of the range.
If your range is removed for cleaning, servicing or any reason, be sure the anti-tip
device is re-engaged properly when the range is replaced. Failure to take this
precaution could result in tipping of the range and cause injury.
How to Remove Protective Shipping Film and Packaging Tape
Carefldly grasp a corner of file protective
shipping fihn wifli your fingels and slowly
peel it from die appliance surface. Do not
use any sharp items to remove die film.
Remove all of the film before using die
appliance for die first time.
To assure no damage is done to die
finish of die product, die safest way to
remove the adhesive flom packaging tape
on new appliances is an application of a
household liquid dishwashing detergent.
Apply wifli a soft clofli and allow to soak.
NOTE:Theadhesivemustberemovedfromall
parts.Itcannotberemovedif it isbakedon.
Control Knobs
Thecontrolknobsmayberemovedforeasier
cleaning.
Make sure the knobs are in the OFF
positions and pull them straight off the
stems for cleaning.
The knobs can be cleaned in a
dishwasher or fliey may also be washed
Mill soap and wateL Make sure die inside
of the knobs are dry before replacing.
Replace the knobs in the OFFposition to
ensure proper placement.
Oven Vent
Thelowerovenventislocatedabovetheright
rearsurfaceunit.Theupperovenventislocated
abovetheleftrearsurfaceunit.
These areas couM become hot during
oven use.
It is normal for steam to come out of
the vent.
Theventisimportantforproperaircirculation.
Neverblockthisvent.
Control Panel
If desired,thetouchpadsmaybedeactivated
beforecleaning.
See the Control Lock information in the
Using the clocg kitchen timer and control
lock section in this manual.
(;lean up splatters with a damp cloth.
You may also use a glass cleaneL
Remove heavier soil Mill waml soapy
wateL Do not use abrasives of any kind.
Reactivatethetouchpadsaftercleaning.
31
Loading ...
Loading ...
Loading ...