Loading ...
Loading ...
Loading ...
![](https://files.manualsfile.com/9302233-38517124790/bg54.png)
Automatic Bu_onhole (Continued)
® To Sew
(_ Stitch width: 2
(_ Stitch length: 3 to 4
Needle thread tension: 2 to 6
4_ Presser foot: Buttonhole foot
NOTE:
Best results are obtained by using #60 or
#80 lightweight thread for bobbin thread.
It is advisable to use a #11 blue stretch
needle when sewing knits and synthetic
fabrics. You can obtain buttonholes with
wider cutting space by setting stitch width
at 1.5 instead of 2.
O Needle thread
Bobbin thread
(_ Two round holes
(_ Rectangular hole
(_ Two pins fitting with the two round holes
(_ Lever
(_ Hook fitting with the rectangular hole
(_ Base plate
Remove the extension table (accessory box). Raise
the needle to its highest position by turning the
handwheel counterclockwise. Remove the foot
holder. Pull bobbin thread about 7 cm (3") straight
back toward the rear of the machine. Insert the hook
of the base plate (_ into the rectangular hole on the
needle plate (_. Pull lever (_ back to align the hook
with the rectangular hole. Snap base plate (_ down
to fit the two pins (_ at the back of base plate into
the two round holes on needle plate (_. Release the
lever.
Cb
WIDTH
I
Q
®
LENGTH
®
J
76
Loading ...
Loading ...
Loading ...