Loading ...
Loading ...
Loading ...
Wireless Controller - Instruction Manual
23
SWITCHING OFF THE APPLIANCE
The appliance can be turned off in “standby” posi-
tion by means of the On/Off button. In this case,
the set program remains stored in the memory.
For GENERAL SWITCH-OFF use the master switch
on the power supply or disconnect the power plug.
The appliance will switch off completely.
GENERAL switch-off of the appliance must
only be done when the convection fan is no lon-
ger working after a period of heati
ng operation!
SWITCHING OFF FOR LONG PERIODS
If the appliance is not used for a long period of
time, the following operations should be performed:
- Press the On/Off key on board the machine
to switch off the appliance.
- Move the omnipolar master switch, if fitted to
the system, to “off” or remove the plug from the
socket on the appliance;
- Close the gas tap.
CLEANING THE APPLIANCE
Preliminary operations
-
Press the On/Off key on board the machine to switch off the appliance;
- Move the omnipolar master switch, if fitted to the system, to “off” or remove the plug from the
socket on the appliance;
- Close the gas tap;
- Wait for the appliance to completely cool down.
Cleaning the outer surfaces
Clean the accessible parts to remove any dust deposits, spider webs and the like.
Use compressed air to blow away
the dust, including at hard-to-access points.
To clean the plastic or painted parts, never use solvents or abrasive detergents as these could dama-
ge the treated parts.
Use neutral products readily available on the market.
Do not grease the synthetic material parts.
24
Loading ...
Loading ...
Loading ...