Loading ...
Loading ...
Loading ...
Wireless Controller - Instruction Manual
11
-Carefully read the following instructions as these provide important information on installa-
tion and correct use of the Remote Control.
-The installer is kindly asked to give this booklet to the end user and to invite him/her to read
its contents.
-In case of malfunction or faults during the warranty period, contact the Manufacturer’s
Authorised Technical Assistance Centre only.
12
ABOUT THE RADIO WIRELESS CHRONOTHERMOSTAT
The use of this control allows:
- the best positioning of the detection sensor (on wall or table base) for controlling the actual room temperature;
- the possibility of controlling several appliances in the same room;
- programming daily and weekly operation.
Wireless radio chronothermostat without wires:
- one of a kind as regards ease of use and the control of
all the operating modes;
- distinguished by a large graphic Display unit that helps the user to make the various control and
adjustment settings;
- uses an “NTC” sensor that allows controlling/setting even the smallest room temperature variations (0.5°C),
while maintaining the difference in temperature, between switch-off and switch-on, within about 1°C.
Can also be purchased and used in a previously-i
nstalled appliance.
DIMENSIONS AND INSTALLATION
To install the chronothermostat, you need to:
- release the front with the display keeping the
hook pressed (PUSH key) then rotate upwards
separating it from the rear.
- mark and create holes and fasten the chro-
nothermostat on the wall.
- re-assemble the front with a compass movement,
but downwards until you hear a locking CLICK.
Loading ...
Loading ...
Loading ...