Loading ...
Loading ...
Loading ...
84 GETTING TO KNOW YOUR VEHICLE
3. From inside the vehicle, pull the handle on the header
latch downward to engage the hook into its receiver.
Step Three
4. Pull the handle back upward while squeezing the
hook, locking the latch into place.
Step Four
5. Repeat steps three and four on the other side.
Installing The Rear Window And Quarter
Panel Cover Assemblies
NOTE:
Both quarter panel cover assemblies and the rear window
must
ALL be removed together, or installed together.
If the rear window and quarter panel cover assemblies
were previously removed, proceed as follows to install:
1. Guide the top of the quarter panel cover assembly
up into the retainer.
Step One
2. Engage the plastic retainers on the front of the cover
assembly (toward the front of the vehicle) starting at
the top, and working downward.
Step Two
NOTE:
It is critical that the retainers are fully engaged before the
vehicle resumes motion.
3. Secure the hook-and-loop fastener at the upper front
corner of each quarter panel cover assembly by
pressing firmly.
Step Three
CAUTION!
Failure to follow all quarter panel cover assembly and
rear window install steps could result in damage to the
Soft Top or vehicle.
23_JT_OM_EN_USC_t.book Page 84
Loading ...
Loading ...
Loading ...