Loading ...
Loading ...
Loading ...
318 IN CASE OF EMERGENCY
4. Operate the jack from the front or the rear of the
vehicle. Place the jack under the axle tube, as shown.
Placement for the front and rear jacking locations are
critical. See the following images for proper jacking
locations.
Do not raise the vehicle until you are sure
the jack is fully engaged.
Front Jack Lifting Point
NOTE:
Keep the jack and tools aligned while raising the vehicle to
prevent tool damage.
Front Jacking Location
Rear Jack Lifting Point
Rear Jacking Location
5. Raise the vehicle by turning the jack screw clockwise.
Raise the vehicle only until the tire just clears the
ground surface and enough clearance is obtained to
install the spare tire. Minimum tire lift provides
maximum stability.
CAUTION!
Before raising the wheel off the ground, make sure that
the jack will not damage surrounding truck parts and
adjust the jack position as required.
WARNING!
Raising the vehicle higher than necessary can make the
vehicle less stable. It could slip off the jack and hurt
someone near it. Raise the vehicle only enough to
remove the tire.
23_JT_OM_EN_USC_t.book Page 318
Loading ...
Loading ...
Loading ...