Loading ...
Loading ...
Loading ...
24 GETTING TO KNOW YOUR VEHICLE
Frequency Operated Button Integrated Key (FOBIK-Safe)
To minimize the possibility of unintentionally locking a
Passive Entry key fob inside your vehicle, the Passive Entry
system is equipped with an automatic door unlock feature
which will function only if the ignition switch is in the
OFF position.
FOBIK-Safe only executes in vehicles with Passive Entry.
There are three situations that trigger a FOBIK-Safe search
in any Passive Entry vehicle:
A lock request is made by a valid Passive Entry key fob
while a door is open.
A lock request is made by the Passive Entry door
handle while a door is open.
A lock request is made by the door panel switch while
the door is open.
When any of these situations occur, after all open doors
are closed, the FOBIK-Safe search will be executed. If it
detects a Passive Entry key fob inside the vehicle, the
vehicle will unlock and alert the customer. If Passive Entry
is disabled using the Uconnect system, the key fob
protection described in this section remains active/
functional.
NOTE:
The vehicle will only unlock the doors during a FOBIK-Safe
operation when a valid Passive Entry key fob is detected
inside the vehicle. The vehicle will not unlock the doors
when any of the following conditions are true:
A second valid Passive Entry key fob is detected
outside of the vehicle (within 5 ft (1.5 m) of a
Passive Entry door handle).
The doors are manually locked using the door lock
knobs.
Three attempts are made to lock the doors using the
door panel switch, and then the doors are closed.
To Lock The Vehicle’s Doors
With one of the vehicle’s Passive Entry key fobs within
5 ft (1.5 m) of the driver or passenger front door handles,
pushing the Passive Entry lock button will lock the
vehicle doors.
Push The Door Handle Button To Lock
NOTE:
When pushing the door handle lock button, DO NOT grab
the door handle. This could unlock the door(s).
DO NOT Grab The Door Handle When Locking
NOTE:
After pushing the door handle button, the driver must
wait three seconds before locking or unlocking the
doors, using any Passive Entry door handle. This is
done to allow the driver to check if the vehicle is locked
by pulling the door handle without the vehicle
unlocking.
If Passive Entry is disabled using the Uconnect system,
the key fob protection described in “Preventing Inad-
vertent Locking Of Passive Entry Key Fob In Vehicle”
remains active/functional.
The Passive Entry system will not operate if the key fob
battery is depleted
Ú page 404.
23_JT_OM_EN_USC_t.book Page 24
Loading ...
Loading ...
Loading ...