Loading ...
Loading ...
Loading ...
314 IN CASE OF EMERGENCY
6. Block both the front and rear of the wheel diagonally
opposite of the jacking position. For example, if the
driver’s front wheel is being changed, block the
passenger’s rear wheel.
Wheel Blocked Example
NOTE:
Passengers should not remain in the vehicle when the
vehicle is being jacked in position.
JACK LOCATION
The jack and tools are stored under the right rear seat.
Jack And Tool Location
See the following steps to remove:
1. Fold up the right rear seat.
2. Remove the jack and tools by turning the wing bolt
counterclockwise, remove the wing bolt and then
slide the assembly out from under the seat.
Removing the Wing Bolt
3. Release the tool bag straps from the jack and remove
tools from bag.
Jack And Tool Bag
4. Remove tool kit and assemble tools.
Jack And Tool Bag
23_JT_OM_EN_USC_t.book Page 314
Loading ...
Loading ...
Loading ...