Loading ...
Loading ...
Loading ...
38 GETTING TO KNOW YOUR VEHICLE
Connect Wiring Harness To Exterior Mirror
3. Place the base of the exterior mirror into the hole on
the door, and support it while attaching the three
mirror bolts through the inside of the door using a
#T40 Torx head driver.
Attach Exterior Mirror
NOTE:
Recommended torque for the mirror bolts is
5.9 ft· lb / 8.0 N·m.
4. Repeat steps 1-3 on the opposite side front door.
Half-Door Removal
To remove the half-doors, repeat the installation steps in
reverse order.
NOTE:
When removing the upper half-doors, push upward firmly
on the middle of the upper half-door until the posts detach
from the lower half.
Push Upward On Middle Of Upper Half Door To Remove
1 — Exterior Mirror
2 — Wiring Harness
1 — Support Mirror From Outside
2 — Attach Three Mirror Bolts From Inside
23_JT_OM_EN_USC_t.book Page 38
Loading ...
Loading ...
Loading ...