Loading ...
Loading ...
Loading ...
PREPARATION
Yourrange, like many other household items, is heavy and can settle into soft floor coverings such as cushioned
vinyl or carpeting. When moving the range on this type of flooring, use care, and it is recommended that these
simple and inexpensive instructions be followed.
Installing
The range should be installed on a 1/4inch thick sheet of
plywood (or similar material) as foflows:
\'\]_en the floor coveting ends ;it the fi'ont of the range,
the area that the range will rest on should be built up
with plywood to the same le\ el or higher than the floor
co\vfing. This will allow the range to be Fno; ed for
cleaning or selaidng.
Leveling
Leveling screws are located on each corner ot the base
of the range. Remove the bottom drawer and _)tl can
level the range on an tllle;'ell floor with the rise of
a nutdfi_vr or cham_el locks.
To remo_v the drawel, pull the drawer out all the way,
tilt up the fl'ont and take it out. To replace the draweI;
insert glides at back of the drmver beyond stop on the
range glides. Liii drawer if necessary to insert easily.
Let the ti'ont of drawer down, then push in to close.
One of the rear ]e\ eling screws will engage the Anti-Tip
device. _Mlow for some side to side ac!iustment, _Mlow
a minimum clearance of 1/8" between the range
and the le\ eling screw that is to be installed into the
Anti-Tip device.
READANDFOLLOWTHISSAFETYINFORMATIONCAREFULLY.
SAVETHESEINSTRUCTIONS
7
Loading ...
Loading ...
Loading ...