Loading ...
Loading ...
Loading ...
During calibration, move
the scanner only in the
white area.
Warning:
z Do not interrupt the calibration sequence or try to shut off the device while it is
calibrating. If you stop the calibration before it has completed, a calibration error may
occur. As a result, when you next power up the unit, an error message may be displayed,
and you will have to power off the unit and repeat the instructions in this section.
z Calibrate the scanner only when color of the scanned image looks abnormal.
z Make sure the memory card is inserted.
z Keep the calibration sheet from dust and debris. Any dirt may make the calibration chart
invalid or impact the calibration result.
Use only the included calibration sheet to calibrate the scanner. z
5.2 Clean the Scanner and Feeder Dock
It is recommended to clean the scanner and feeder dock approximately every 200 scans or if
vertical lines or stripes appear on the scanned image.
Use only the recommended or supplied tool to clean the scanner and feeder dock.
Cleaning steps:
Clean the wand scanner:
1. Remove the scanner from the feeder dock.
2. Turn the scanner over to reveal the rollers and glass.
3. Wipe the rollers and the glass with the included cleaning cloth.
4. Wipe the scanner with a dry and clean lint-free cloth.
Rollers
Glass
Wand Scanner
5-2
Loading ...
Loading ...
Loading ...