Loading ...
Loading ...
Loading ...
7o Mower Retrieval
a, Remove mower dfive be#. (See "MOWER DRtVE BEL T
REMOVAL," page 22, through slop 3.)
b. Pull bel_ off engine pulley (Fig. 39),
c, Pull retainer spdngs out of rear suspension trunnions.
Remove rear suspension trunnions from lift brackets
(Fig. 41)
d. Pu# retainer spring out of rear hinge pin. Remove rear
hinge pin (Fig. 41),
e. Pu# refainer spring out of front hinge pin. Remove front
hinge pin (F_. 41) and parallel link.
f, Use tift tever to r_se suspension armso Slide mower out
from under tr_ctor,
BEFORE DRiViNG YOUR TRACTOR, IF_
STALL MOWER OR RE&,_OVE PARALLEL
LiNK (F{G. 41).
'4OTE: iF AN ATTACHMENT O]34ER THAN THE MOWER
3ECK tS TO BE MOUNTED ON THE TRACTOR, THE LH. AND
::LH.SUSPENSION ARMS (F_. 4_) SHOULD BE REMOVED.
_. Mower Blade Drive Be# RepJacernent
a. Remove mower drive belt, (See page 22°)
b. Removemowerfromtractor. (See"MOWERREMOVAL,"
above, )
c, Pull beit towards rear of mower at tensioning pulley (Fig
42). Place a block bePween tension bracket and mower
lift bracket, Roll belt off tensioning pulley.
d. Roll belt off all other pulleys.
e, Slide bett from under spring.
f, To instafl be#, reverse above procedure. Make sure belt
is engaged in alf pulleys,
ADJUS
/
_OWER
PARALLEL
LiNK
FIGURE 39
MOWER DRIVE
BELT
BLOCK //_== /
MOWER
LiFT
BRACKET
RGUR_= 42
23
_OWER
PULLEY
LEVER
RETAINER
SPRING
/
FIGURE 4O
ATTACHMENT
DRIVE
PULLEY
RETAtNER
SPRING
UNK
FRONT
HINGE
\
REAR HINGE
PiN
FIGURE 41
Loading ...
Loading ...
Loading ...