NAD T758V3I User Manual

Loading ...

ENGLISH

6 At “A/V Presets” page, set “Preset: 2” to the following conditions - use

[ D/F ] to select “Yes” or “No” and press [ENTER] to conrm selection

and move to the next setting.

While at “Save Current Setup to Preset” menu line, use [ S ] to save the

settings above to “Preset 2”. When you recall “Preset 2” using the remote

control (for AVR4, “A/V PSET” + “2”), the above preset values allocated at

“Preset 2” (preset settings as shown in the OSD captures at Step 4) will

be recalled and eected at the current source.

Note that “Speaker Setup” is set to “No”. At this condition, there will

be no “Speaker Setup” values that will be eected at “Preset 2”. The

“Speaker Setup” settings that will be applied at “Preset 2” will be the last

or current “Speaker Setup” settings which in this sample are the same

“Speaker Setup” settings shown above in Step 1.

7 You can setup up to 5 A/V Presets. These same A/V Presets can also be

associated/defaulted to each Source in the “Source Setup” window as below.

In the above example, “Preset 1” settings are allocated for Source 1.

Whenever Source 1 is accessed, the “Preset 1” settings will be applied

to Source 1. You can still manually override the assigned A/V Preset

allocation in a specic Source with another Preset setting/number by

way of pressing the appropriate remote control buttons.

RECALLING PRESETS

You may recall an A/V Preset number at any time using the AVR4 remote

control. Press the AVR4’s A/V PSET key and then the numeric key 1-5

corresponding to the desired A/V Preset number. The newly recalled A/V

Preset will then manifest or replace the previous A/V Preset (if any).

OPERATION

USING THE T 758  SETUP MENU

Loading ...

NAD T758V3I A/V Surround Sound Receiver