Loading ...
Loading ...
Loading ...
ENGLISH
23
TRIGGER SETUP
The T 758 features a congurable +12V TRIGGER OUT that can be used to
activate a component or system it is fed into. It is used to turn on/o other
compliant devices.
The T 758’s +12V TRIGGER OUT is dependent on the mode it is associated
with. There are three choices where the +12V TRIGGER OUT can be
assigned and these are - Main, Zone 2 and Source Setup.
Main: +12V DC is available at +12V TRIGGER OUT when the T 758 is at
powered state.
Zone 2: When the Zone 2 is at powered state, +12V DC is available at
+12V TRIGGER OUT.
Source Setup: If Trigger Output is linked to “Source Setup”, +12V DC
is available at +12V TRIGGER OUT whenever the particularly assigned
Source is selected.
DELAY
The availability of +12V DC at Trigger Out can be regulated. If it is desired
that +12V DC is available without delay the moment Trigger Out is linked
to its assigned setting, set Delay to 0s. Otherwise, one can select through a
delay time of 1s to 15s.
LISTENING MODE SETUP
The T 758 has various listening mode options and is mostly congurable.
These are provided to reproduce a variety of sound eects depending
upon the content of the source to be played.
LISTENING MODES
The audio format as detected by the selected Source can be automatically
congured and processed through the following options:
DOLBY DIGITAL
Dolby Digital is the multi-channel digital signal format developed in the
Dolby laboratories. Discs bearing the Dolby Digital (double-D symbol) logo
were recorded with up to 5.1 channels of digital signals, reproducing a
much better sound quality, with dynamic and spatial sound sensations that
are much better than in the previous Dolby Surround.
A Dolby Digital audio input can be congured relative to its format as
follows
Stereo: If the detected audio is of Dolby stereo format, you can default
it to either Dolby Surround or None.
Surround: If the detected audio is of Dolby Surround format, you can
default it to one of the following settings - Dolby Surround, Stereo
Downmix or None.
None: If “None” is selected, the Dolby Digital signal will be defaulted
to its native format. With this setting, “Direct” becomes available as a
Listening Mode option.
OPERATION
USING THE T 758 SETUP MENU
Loading ...
Loading ...
Loading ...