Loading ...
Loading ...
Loading ...
8
INSTALLING THE BATTERIES
Transmitter and Receiver
The transmitter and receiver are each powered by two AA batteries. To install the batteries, follow these steps.
1. Make sure the units are turned off by pressing and holding the power button on all units.
2. Pinch the battery compartment tabs together, and the compartment door will pop open.
3. Insert fresh batteries, following the orientation diagram on the back of the unit.
4. Press the compartment door down over the batteries until it locks into place.
Rechargeable Batteries
You can use rechargeable AA batteries with the receiver and transmitter.
To recharge: Place them in the battery compartment and connect the receiver or transmitter to a powered USB
port or charging device with a Micro-USB to USB Standard-A cable (not included).
Charging status indicator:
RED Charging in progress
GREEN Charging complete
Important! Do not attempt to recharge non-rechargeable batteries—this may result in damage to the unit and
void the warranty.
Loading ...
Loading ...
Loading ...