Loading ...
Loading ...
Loading ...
17
The audio level should be as high as possible without peaking. If the meter rises to the top due to intermittent
loud noises or vocal plosives like P and B sounds, it could distort the audio. To remedy peaking audio, see
Setting Mic/Line Level Input
and
Setting Input Volume (Gain)
below.
OPERATING THE TRANSMITTER
Setting Signal Strength
The transmitter has a selectable high and low RF transmission power
setting.
L (Low, 15 mW) is ideal when the transmitter is close to the receiver.
It also provides the transmitter with approximately 20% more run time.
H (High, 25 mW) transmits a stronger signal, and allows the microphone
to cover a wider area and more range. This setting is recommended if your subject is moving around or is
consistently more than 200 feet from the receiver. This setting is also recommended if you’re recording in an area
with heavy RF interference.
Loading ...
Loading ...
Loading ...