Loading ...
Loading ...
Loading ...
![](https://files.manualsfile.com/35486717-uwm-2/bgc.png)
12
INTERFERENCE
Radio Frequency (RF) or Electromagnetic (EM) interference can cause buzzing or humming, noise bursts, pops,
clicks, and dropouts.
The channel status indicator shows whether a channel is usable, or if it has interference that can affect your audio.
See
Finding an Interference-Free Channel
below.
If the channel status indicator shows channel interference, or if interference develops while the system is in use,
change the transmitters and receiver channel:
Important! The transmitters and the receiver must all be set to the same channel.
To avoid interference:
1. Turn off smartphones, walkie talkies, and computers in the area.
2. Try to avoid areas where there are high-voltage power cables for lighting and sound equipment.
3. Improve the line of sight between the transmitters and the receiver.
4. If the receiver is inside a metal equipment rack, move it a location where it isn’t surrounded by metal.
Play/pause, volume control, and forward and back track selection can be controlled from the front panel or from
the remote.
Loading ...
Loading ...
Loading ...