Loading ...
Loading ...
Loading ...
PROBLEM: The walking belt slows when walked on
SOLUTION: a. Use only a single,outlet surge suppressor that meets all of the specifications described on page 8.
b. If the walkingbelt is overtightened, treadmill perfor-
mance may decrease and thewalking belt may be-
come damaged. Remove the key and UNPLUG THE
POWER CORD. Usingthe allen wrench, turnboth
rear roller adjustmentboltscounterclockwise,1/4 of a
turn. When the walking belt is properly tightened, you
should be able to lift each side of the walking belt 3 to
4 inches off the walking platform. Be careful to keep
the walking belt centered. Plug in the power cord, in-
sertthe key, and run the treadmill for a few minutes.
Repeat until the walking belt is properly tightened.
Rear Roller Adjustment Bolts
c. If the walking belt still slows when walked on, please call our Customer Service Department, toll-
free.
PROBLEM: The walking belt is off-center or slips when walked on
SOLUTION: a,
Ifthe walking belt is off-canter,remove the key and UN-
PLUG THE POWER CORD. If the walking belt has
shifted to the left, usethe allenwrenchtoturnthe left
rear rollerboltclockwise1/2 ofa turn;if the walking belt
has shifted to the right, turnthe leftrear rollerboltcoun-
terclockwise1/2of a turn. Be carefulnotto overtightenthe
walking belt. Pluginthe powercord,insertthe key, and
runthe treadmill fora few minutes.Repeat untilthewalk-
ing belt iscentered.
b. If the walking belt slips when walked on, first remove the
key and UNPLUG THE POWER CORD. Using the allen
wrench, turn both rear roller bolts clockwise, 1/4 of a turn.
When the walking belt is correctly tightened, you should
be able to lift each side of the walking belt 3 to 4 inches off
the walking platform. Be careful to keep the walking belt
centered. Plug in the power cord, insert the key, and care-
fully walk on the treadmill for a few minutes. Repeat until
the walking belt is properly tightened.
b
PROBLEM: The incline of the treadmill does not change correctly or does not change when iFIT.com
CD's and videos are played
SOLUTION: a. With the key in the console, pressone ofthe Inclinebuttons. While the incline is changing, re-
move the key. After a few seconds,re-insertthe key. The treadmillwillautomaticallyriseto the
maximum inclinelevel and then returnto the minimumlevel.This willrecalibratethe incline.
28
Loading ...
Loading ...
Loading ...