Loading ...
Loading ...
Loading ...
EN
8
Safety
www.bora.com
A minimum space of 90 cm between the blow
out opening of the fan and the blow out
opening of the wall sleeve must be planned in.
2.4 Safety instructions – Cleaning
and Maintenance
The appliance must be cleaned at regular
intervals. Dirt can lead to damage or bothersome
odours. Remove dirt immediately.
Any work involving cleaning and maintenance
must not be carried out by children unless
they are supervised at all times while doing
so.
Do not use a steam cleaner for cleaning.
Steam can cause a short circuit on live parts
and thus lead to property damage (see the
Cleaning and Maintenance chapter).
When cleaning, ensure that no water
penetrates the appliance. Use only a slightly
damp cloth. Never spray the device with
water. Water penetration can cause damage!
CAUTION!
Risk of injury when inserting the
grease filter!
Injuries can be caused if the hands slip
while inserting the grease lter into the
cooktop extractor.
When inserting the grease filter, only
ever hold it by the handle provided.
2.5 Safety instructions –
disassembly and disposal
The appliance must only be disassembled by
trained specialists who are familiar with and
comply with the standard national regulations
and supplementary regulations of the local utility
companies.
Work on electrical components must only be
conducted by trained electrical personnel.
DANGER!
Risk of asphyxiation!
Packaging components (e.g. lm,
polystyrene) can be life-threatening for
children.
Store all packaging components out
of reach of children.
Dispose of the packaging properly
and immediately.
2.3.1 Safety Instructions – Cooktop
extractor
DANGER!
Risk of poisoning caused by
combustion gases!
When the cooktop extractor is used
in exhaust mode, it draws in air from
the room it is installed in and from
neighbouring rooms. Without sucient
air, there will be a drop in air pressure.
Toxic gases could be drawn out of the
chimney or extraction ducting on a
replace that depends on the room air
and back into the room.
Make sure that there is always a
sufficient air supply.
Only use reliable, tried-and-tested
switching devices, (e.g. window
contact switch, low pressure
warning device) and have them
approved by a qualified expert
(certified chimney sweep).
DANGER!
Risk of electric shock!
The control unit can contain residual
charge and cause an electric shock.
Do not touch exposed contacts on
the control unit.
DANGER!
Risk of electric shock!
Incorrect stripping of the connection
cable to external switching devices
results in a risk of electric shock.
Ensure that the connection cable is
secured with the strain relief clamp
within the universal control unit.
Ensure that the stated stripping
lengths are adhered to.
Special safety information for exhaust systems
Please pay attention to the channel length
between the fan and the wall sleeve in
straight channel design.
Loading ...
Loading ...
Loading ...