Loading ...
Loading ...
Loading ...
EN
35
Operation
www.bora.com
Permanently deactivating the childproofing
feature
INFO The childproofing feature can only be permanently
deactivated if the knob ring is in the 12 o’clock
position.
Press the touch surface of the control knob for
5 seconds.
An acoustic signal can be heard and the display on the
control knob switches to
L
. After 10 seconds, another
acoustic signal sounds and the display goes out. The
childproofing feature is deactivated.
Deactivating the childproofing feature for a
cooking session
Turn the knob ring from the 12 o-clock position to a
power level.
L
appears in the control knob display.
Press the touch surface of the control knob for
5 seconds.
An acoustic signal can be heard and the control knob
display shows the power level selected.
The childproofing feature is only deactivated for this
cooking session and you can set the power level you
want.
The childproofing feature is reactivated next time you
switch on.
7.2.6 Crush protection
The electrical cover flap on the cooktop extractor has
crush protection.
If the cover flap is blocked while it is opening or
closing, the movement is stopped automatically.
The cover flap moves back to its starting position.
End
is displayed on the control knob.
Remove the foreign body which is in the way.
Press the touch surface for 1 second.
The cover flap is working again.
If the cover flap is blocked three times in succession
while automatically opening or closing, the appliance
will be automatically disabled for 5 minutes.
To re-activate the appliance after 5 minutes, touch the
touch-operated area for 1 second.
7.3 Note the filter service function
If a flashing
F
is shown on the control knob display after
switching on the cooktop extractor, the service life of the
activated charcoal filter is up (for recirculation only) and
the grease filter needs thorough cleaning.
7.2.3 Switching off the cooktop extractor
Fig. 7.3 Switching o the cooktop extractor
Twist the knob ring to the 12 o’clock position. The
knob ring slots into this position and the automatic
after-run starts.
7.2.4 Automatic after-run
Once the cooktop extractor is switched off, the
automatic after-run starts.
n
appears in the control
knob display.
The cooktop extractor switches off automatically after
20 minutes and the cover flap closes.
Deactivate automatic after-run early.
Press the touch surface of the control knob for a
second. An acoustic signal can be heard and the
display switches to
0
.
The cover flap closes and the display goes out after 10
seconds.
7.2.5 Childproofing feature
The cooktop extractor has a childproofing feature to
prevent accidental switching on.
Activating the childproofing feature
INFO The childproofing feature can only be activated
if the knob ring is in the 12 o’clock position and
there are no active functions.
Press the touch surface of the control knob for
5 seconds.
An acoustic signal can be heard and the display on the
control knob switches to
L
. After 10 seconds, another
acoustic signal sounds and the display goes out. The
childproofing feature is activated.
Loading ...
Loading ...
Loading ...