Loading ...
Loading ...
Loading ...
Shooting
2
62
EN
5
Press the
Q
button to select the highlighted option.
• The menus will be displayed.
6
Press the MENU button to exit the menus.
• If an option other than [Off] is selected, [LIVE BULB] or [LIVE TIME] will appear in the
display.
7
Adjust aperture.
• At default settings, aperture can be adjusted using the
front dial.
1:02:03
BULB
F5.6
1023
ISO-A
200
L
F
4K
30p
M
Aperture
8
Take pictures.
• In bulb mode, keep the shutter button pressed. The exposure ends when the button
is released.
• In time mode, press the shutter button all the way down once to start the exposure
and again to end it.
• The exposure ends automatically when the time selected for [Bulb/Time Timer] is
reached. The default is [8 min]. The time can be changed. g [Bulb/Time Timer]
(P. 134)
• [Noise Reduct.] is applied after shooting. The display shows the time remaining until
the process is complete. You can choose the conditions under which noise reduction
is performed (P. 134).
• During live time photography, you can refresh the preview by pressing the shutter button
halfway.
• Some limitations apply to the choice of ISO sensitivity settings available.
• There are limits on the settings for the following functions.
Sequential shooting, self-timer shooting, time lapse shooting, image stabilizer, multiple
exposure*, etc.
* When an option other than [Off] is selected for [Live Bulb] or [Live Time] (P. 134)
• [K Image Stabilizer] (P. 93) turns off automatically.
• Depending on camera settings, the temperature, and the situation, you may notice noise
or bright spots in the monitor. These may sometimes appear in pictures even when [Noise
Reduct.] (P. 134) is enabled.
Noise in images
While shooting at slow shutter speeds, noise may appear on screen. These phenomena
occur when the temperature rises in the image pickup device or image pickup device
internal drive circuit, causing current to be generated in those sections of the image pickup
device that are not normally exposed to light. This can also occur when shooting with a
high ISO setting in a high-temperature environment. To reduce this noise, the camera
activates the noise reduction function. g [Noise Reduct.] (P. 134)
%
• During bulb/time photography, the brightness of the subject in the display is enhanced for
ease of viewing when lighting is poor. g [Live View Boost] (P. 133)
Loading ...
Loading ...
Loading ...