Loading ...
Loading ...
Loading ...
Setting Up Your Remote ControJ (depending on the model)
After the television has been set up properly, your remote control can operate in
five different modes: TV, DVD, Cable, Set-Top Box, VCR, Pressing the corresponding
button on the remote control allows you to switch between these modes, and control
whichever piece of equipment you choose.
The remote control might not be compatible with all DVD Players, VORs, Cable boxes, and
Set-Top Boxes.
Setting Up the Remote to Operate Your VCR
1. Turn off your VCR
2, Press the VCR button on your TV's remote control
3, Press the SET button on your TV's remote control.
4. Using the number buttons on your remote control, enter three digits of the VCR code
listed on page 20 of this manual for your brand of VCR. Make sure you enter three digits [......
of the code, even if the first digit is a "O'.
({f more than one code is listed, try the first one.) .......
5. Press the POWERO button on the remote control.
Your VCR should turn on if your remote is set up correctly.
If your VCR does not turn on after set up, repeat steps 2, 3, and 4, but try one of the
other codes listed for your brand of VCR.
If no other codes are listed, try each VCR code, O00through 080.
Note on Using Remote Control Modes: VCR
When your remote control is in "VCR" mode, the volume buttons still control your TV's
volume.
©0
.... ....
QRE_UR'_ 6 O_¢
['MCeE S_MODE
d:t3_ d_ _
OS_ O_
Setting Up the Remote to Operate Your Cable Box
1. Turn off your cable box.
2. Press the CABLE button on your TV's remote control.
3. Press the SET button on your TV's remote control.
4. Using the number buttons on your remote control, enter three digits of the cable box cod_
listed on page 21 of this manual for your brand of cable box. Make sure you enter three
digits of the code, even if the first digit is a 'O'. (If there is more than one code listed, try
the first one.)
5. Press the POWERO button on the remote control.
Your cable box should turn on if your remote is set up correctly.
If your cable box does not turn on after set up, repeat steps 2, 3, and 4, but try one of the!
other codes listed for your brand of cable box. If no other codes are listed, try each code,
go0 through 046........
---Note on Using Remote Control Modes: Cable Box
When your remote control is in "CABLE" mode, the volume buttons still control your TV's
volume.
ANT_ C,_LISTWlSELI_K REC
...._Q___Q___Q___®....
..... ....
6 5
p,
Loading ...
Loading ...
Loading ...