Loading ...
Loading ...
Loading ...
" ADJUSTMENTS '
WARNING:
Your router should never be connected to power supply
when you are assembling parts, making adjustments,
installing or removing cutters, or when not in use.
Disconnecting you rrouter willprevent accidental starting
that could cause serious injury.
i
INSTALLING/REMOVING CU'I-rERS
See Figures 3, 4, and 5.
1. UNPLUG YOUR ROUTER.
WARNING:
Failure to unplug your router could result in accidental
starting causing serious injury.
2.
Place the posilock spindle lock into lock position. See
Figure 3. NOTE: If spindle does not lock, turn collet nut
with wrench, applying pressure at the same time to the
spindle lock with your thumb or finger. When lock
mechanism engages with notch in spindle, spindle lock
will slide into lock position.
WARNING:
To prevent damage to the spindle or spindle lock, do not
attempt to engage spindle lock while motor is running.
Always allow motor to come to a complete stop and
unplug it before engaging spindle lock.
i
3. Place router upside down on workbench or lay it face
down on its side in order to gain easy access to collet
nut.
4. Place 7/8 in. end of the combination wrench provided
through back of router base onto collet nut and turn
counterclockwise to loosen. See Figure 4.
WARNING:
If you are changing a cutter immediately after use, be
careful not to touch the cutter or collet with your hands or
fingers. They will get burned because of the heat buildup
from cutting. Always use the wrench provided.
CUTTER
®
COMBINATION
, WRENCH
COLLET
NUT
Paqe 8
Loading ...
Loading ...
Loading ...