Loading ...
Loading ...
Loading ...
80
4. The mullion trim strip has a small lip that rests under the cabinet flange. The fascia
screw on each end of the mullion does not need to be removed.
5. To remove mullion:
a. Grasp the mullion with each hand.
b. Push mullion to the right to clear lip of flange on the left.
c. Rotate mullion forward to clear the mullion from brackets and liner.
d. Lift outward to remove.
6. Disconnect the LED harness on the right hand side of the mullion assembly.
7. Remove the decorative screw caps and screws that secure the coil cover.
8. Remove the P-clamp to the communication cable on the top right hand side of the coil
cover. This will allow enough slack to pull the coil cover outward.
9. Remove the coil cover by pulling outward on the right hand side to clear the rocker
switches on the left hand side of the cabinet.
10. Disconnect the fan harness; defrost thermistor, and cabinet thermistor as needed.
Disconnect the
communication before
drawers are removed.
Remove top and bottom
drawers.
Loading ...
Loading ...
Loading ...