Loading ...
Loading ...
Loading ...
77
Section 8: Evaporator Compartment Access
To gain access to the evaporator compartment of the beverage center, wine cooler or
refrigerated drawers are very similar but slightly unique.
After drawers or shelving have been removed, the decorative plastic snap caps will have to be
removed to access screw removal for both the cantilever brackets, coil cover, and thermistor
shield.
NOTE: Refrigerated Drawers: See Section 7.3.1: Drawer Removal for additional
information.
8.1: Beverage Centers:
1. Remove all shelving
2. Remove both corner brackets and the center mounted bracket.
3. Remove decorative plastic snap caps.
4. The plastic cap located at the bottom of the center cantilever mounting rail is hinged on
one side; it is slightly larger than the remaining plastic decorative snap caps. Remove
screws around the perimeter of the coil cover.
5. Carefully remove the coil cover and disconnect the evaporator fan and thermistor wires
as needed.
Hinged screw cover. Location varies
on Beverage Center and Wine Cooler.
A knife or small putty knife is used to
pop each snap cap off the screw heads.
Place the blade on the rear base of the
cap and lightly pry upwards.
Loading ...
Loading ...
Loading ...