Loading ...
Loading ...
Loading ...
65
Defrost Time Out (DTO) is the total time of compressor off time; including both defrost and
drip time cycles.
AS OF 8/1/15 THE FOLLOWING CHANGES WERE MADE TO THE DEFROST TIME OUT (DTO) ON
THE FOLLOWING MODELS:
On all models except for the RF, RI, DZ and ML24WS; the DTO was expanded from 60
to 75 minutes.
Model ML24WS was expanded from 40 to 75 minutes.
RF, RI, and DZ models remain the same.
6.6.3 Manual Defrost
A manual defrost can be activated by using the following sequence:
Press the LOCK and MINUS key simultaneously and hold for 3 seconds.
The display will flash dEF (defrost mode) three times before entering the
defrost mode.
dEF will be displayed for the duration of the defrost cycle.
The defrost cycles will terminate when either of the following conditions are
achieved first:
o the defrost has been active for 40 minutes
o the defrost thermistor reaches 40°F
6.7 Error Codes
With the Aurora control there are four error codes that could appear on the user interface
display. They are as follows:
EL : Compartment thermistor open or out of range
Ed : Defrost thermistor open or out of range
EL / Ed : Multiple thermistor errors, open or out of range
CE : Communication cable error, broken connector pin or wire
Loading ...
Loading ...
Loading ...