Loading ...
Loading ...
Loading ...
(466,1)
北米Model "A2620BE-B" EDITED: 2022/ 6/ 24
around the drilled hole.
. Be sure your trailer has safety
chains and that each chain will
hold the trailer’s maximum gross
weight. Towing trailers without
safety chains could create a traf-
fic safety hazard if the trailer
separates from the hitch due to
coupling damage or hitch ball
damage.
. Use only a ball mount that is
suitable for the trailer hitch. Use
the hitch only as a weight carry-
ing hitch. Do not use with any
type of weight distributing hitch.
. The standard bumper beam must
be installed after you remove the
trailer hitch. Consult a SUBARU
dealer for purchase of a standard
bumper beam if you do not have
the original.
. If a trailer hitch is installed, it is
not possible to install the rear
towing hook.
CAUTION
Do not modify the vehicle exhaust
system, brake system, or other sys-
tems when installing a hitch or other
trailer towing equipment.
When any of the tires are punctured, you
can seal the tire temporarily. However, do
not tow a trailer when a sealed tire is used.
We recommend that you consult the
nearest SUBARU dealer for details.
The maximum gross trailer weight and
maximum gross tongue weight are indi-
cated in the following table.
Maximum
gross trailer
weight
Maximum
gross tongue
weight
2.4 L models
3,500 lbs
(1,588 kg)
350 lbs
(159 kg)
2.5 L models
2,700 lbs
(1,224 kg)
270 lbs
(122 kg)
When towing a trailer, refer to “Trailer
Towing (Outback/Subaru Outback
Wilderness)” �P467.
& Connecting a SUBARU Gen-
uine Trailer Hitch
s08ak01
1. Remove the receiver cover from the
hitch receiver tube. Then insert the ball
mount into the hitch receiver tube.
2. Insert the hitch pin into the hole located
on the hitch receiver tube so that the pin
passes through the ball mount.
Trailer Hitch (Outback/Subaru Outback Wilderness – If Equipped)
464
Loading ...
Loading ...
Loading ...