Loading ...
Loading ...
Loading ...
(268,1)
北米Model "A2620BE-B" EDITED: 2022/ 6/ 24
3-15. Turn Signal Lever
s03ai
1) Right turn
2) Lane change right signal
3) Lane change left signal
4) Left turn
If the lever does not return after cornering,
return the lever to the neutral position by
hand.
To signal a lane change, push the turn
signal lever up or down slightly and hold it
during the lane change. The lever will
return automatically to the neutral position
when you release it.
& One-Touch Lane Changer
s03ai01
To flash the turn signal and turn signal
indicator light three times, push the turn
signal lever up or down slightly and
immediately release it.
NOTE
The operational/non-operational
setting of the one-touch lane changer
can be changed by a SUBARU dealer.
Contact the nearest SUBARU dealer for
details. The setting can also be chan-
ged by operating the center information
display. For details, refer to “Car set-
tings” �P226 (11.6-inch display mod-
els) or “Vehicle setting icons” �P246
(dual 7.0-inch display models).
3-16. Wiper and Washer
s03am
WARNING
In freezing weather, do not use the
windshield washer until the wind-
shield is sufficiently warmed by the
defroster.
Otherwise the washer fluid can
freeze on the windshield, blocking
your view.
CAUTION
. Do not operate the washer con-
tinuously for more than 10 sec-
onds, or when the washer fluid
tank is empty. This may cause
overheating of the washer motor.
Check the washer fluid level fre-
quently, such as at fuel stops.
. Do not operate the wipers when
the windshield or rear window is
dry. This may scratch the glass,
damage the blade rubbers and
might cause the wiper motor to
fail. Before operating the wiper
on a dry windshield or rear win-
dow, always use the windshield
washer.
Turn Signal Lever
266
Loading ...
Loading ...
Loading ...