Loading ...
Loading ...
Loading ...
(289,1)
北米Model "A2620BE-B" EDITED: 2022/ 6/ 24
! Compass calibration
s03ap110703
If the compass appears inaccurate, recali-
brate the compass.
1. Select “CALIBRATE” using the right
button.
2. To start the compass calibration, press
the center button.
3. Select “Continue” using the center
button.
4. Select your current location in the
display using the left button.
5. Select “Continue” using the center
button.
6. Once “C” appears in the display, slowly
drive the vehicle in circles until compass is
calibrated.
! HomeLink
®
Wireless Control Sys-
tem
s03ap1108
The HomeLink
®
Wireless Control System
provides a convenient way to replace up to
three hand-held radio-frequency remotes
used to activate devices such as gate
operators, garage door openers, entry
door locks, security systems, and even
home lighting. The below steps are gen-
eric programming instructions; for Genie
and Sommer garage door openers, please
go directly to the HomeLink website.
Additional information and programming
videos can be found at
www.HomeLink.com/Subaru and
www.youtube.com/HomeLinkGentex.
CAUTION
. Before programming HomeLink
to a garage door opener or gate
operator, make sure that people
and objects are out of the way of
the device to prevent potential
harm or damage.
. When programming a garage
door opener, it is advised to park
outside of the garage.
. Do not use HomeLink with any
garage door opener that lacks
safety stop and reverse features,
as required by U.S. federal safety
standards (this includes any gar-
age door opener model manufac-
tured before April 1, 1982). A
garage door that cannot detect
an object signaling the door to
stop and reverse does not meet
current U.S. federal safety stan-
dards.
. It is also recommended that a new
battery be placed in the hand-
held remote (garage door opener
– CONTINUED –
Mirrors
287
3
Instruments and Controls
Loading ...
Loading ...
Loading ...