Loading ...
Loading ...
Loading ...
(287,1)
北米Model "A2620BE-B" EDITED: 2022/ 6/ 24
! Camera calibration error
s03ap110602
When there is a camera calibration error,
the warning indicators will appear as
shown in the illustration.
When the warning indicators appear,
operate the mode lever to select the mirror
mode. In such a case, we recommend that
you consult your SUBARU dealer for
repair.
! Maintenance
s03ap1104
1) Camera
. Make sure to clean the Smart Rearview
Mirror and the area around the camera
regularly. If these parts are not clean, the
screen cannot be seen clearly.
. Wipe off the Smart Rearview Mirror and
the area around the camera by using a dry
soft cloth. If the foreign matter cannot be
removed, first wipe the area off using a wet
soft cloth, and then wipe using a dry cloth.
. Do not use alcohol, benzine or thinner
for cleaning. Doing so could result in
discoloration, deterioration, or malfunc-
tion.
. Make sure to clean the rear camera
lens regularly. When you clean the rear
camera lens, first soak a soft cloth with
diluted mild detergent to wipe it off, and
wipe using a dry cloth.
. During snowy weather, remove the
accumulated snow from around the anten-
na, because snow interferes with the
camera image on the mirror.
. When installing a roof box or a similar
accessory, do not block the area in front of
the camera lens to avoid interfering with
the camera image on the mirror.
. When the Smart Rearview Mirror’s
visibility is poor because there is dirt or
other foreign material adhering to the
camera, switch to the original rearview
mirror.
! Tips
s03ap1105
. Do not use the display mode for a long
time while the engine is not running. Doing
so could result in the battery discharge.
. Do not install radio antennas around
the Smart Rearview Mirror. Radio waves
may disturb the Smart Rearview Mirror
screen.
. Observe the following instructions. Not
doing so could result in malfunction or the
main mirror unit falling off.
– Do not push the button too strongly
or move the lever too forcibly.
– Do not turn the main mirror unit
more than 90 degrees.
– Do not impact the main mirror unit.
– CONTINUED –
Mirrors
285
3
Instruments and Controls
Loading ...
Loading ...
Loading ...