Loading ...
Loading ...
Loading ...
(298,1)
北米Model "A2620BE-B" EDITED: 2022/ 6/ 24
ward.
The outside mirror angle will return to its
original position when the following condi-
tion are met.
. Approximately 9 seconds after the
select lever is moved to any position other
than R (Reverse).
. The ignition switch is turned to the
“OFF” position.
. The vehicle is running.
NOTE
. The reverse tilt-down mirror angle
can be registered with button “1”, “2”
or each of the key fobs. For details,
refer to “Power driver’s seat with
synchronized outside mirrors memory
function” �P34.
. The reverse tilt-down mirror angle
can also be retrieved with the Driver
Monitoring System user information.
To do so, perform user registration in
the Driver Monitoring System settings.
Refer to “Driver Monitoring System”
�P233.
. The operational/non-operational
setting can be changed by operating
the center information display. For de-
tails, refer to “Car settings” �P226.
. The factory setting (default setting)
for this function is set as the front
passenger’s side mirror. The setting of
driver’s side mirror operation can be
changed by a SUBARU dealer. Contact
your SUBARU dealer for details.
CAUTION
Depress the brake pedal during the
reverse tilt-down mirror angle ad-
justment.
To adjust the reverse tilt-down mirror
angle, adjust the outside mirror using the
remote control mirror switch while the
reverse tilt-down operates. For details
about how to adjust the outside mirror
angle, refer to “Remote control mirror
switch” �P295.
Memory function:
The angle of the reverse tilt-down mirror
can be registered. Register the position
with button “1”, “2” or each of the access
key fobs and retrieve the position.
For details about registration or retrieval of
a position, refer to “Power driver’s seat
with synchronized outside mirrors memory
function” �P34.
NOTE
If the seat is moved forward or back-
ward 1.18 in (30 mm) or more, the
reverse tilt-down will move to the
factory default position or the last
position hold.
Hold last position function:
The angle of the reverse tilt-down mirror
can be set to the latest adjusted angle.
The hold last position function operates
when the following condition are met.
. The memory function is not used.
. The seat is moved forward or backward
1.18 in (30 mm) or more.
NOTE
. The factory setting (default setting)
for this function is set as “non-opera-
tional”. This setting can be changed to
“operational” at SUBARU dealers. For
more details, contact a SUBARU dealer.
. If the hold last position function
setting is “non-operation”, the reverse
tilt-down will move to the factory de-
fault position.
Mirrors
296
Loading ...
Loading ...
Loading ...