Loading ...
Loading ...
Loading ...
(37,1)
北米Model "A2620BE-B" EDITED: 2022/ 6/ 24
A chirp will sound once, and the seat
position and outside mirror angle on the
passenger’s side will be registered.
NOTE
If a new position is registered for the
same button, the previously registered
memory position is deleted.
! Registration of the reverse tilt-
down mirror angle with button
“1” or “2”
s01aa020706
CAUTION
Depress the brake pedal when re-
gistering the reverse tilt-down mir-
ror angle.
1. Move the select lever to the “R”
position, then the outside mirror angle on
the passenger’s side will move to the
reverse tilt-down position.
2. Adjust the outside mirror angle on the
passenger’s side. For details about the
settings, refer to “Remote control mirror
switch” �P295.
3. Move the select lever to the “P”
position, then the outside mirror angle will
return to its original position.
4. Register the adjusted positions by
either of the following procedures.
. Press the “SET” button, then press
either “1” or “2” until a chirp sounds
within 5 seconds.
. While pressing and holding the
“SET” button, press either “1” or “2”
until a chirp sounds within 5 seconds.
A chirp will sound once, and the seat
position and outside mirror angle on the
passenger’s side will be registered.
NOTE
. The outside mirror angle will return
to its original position approximately 9
seconds after the select lever is moved
to any position other than “R” position.
. The factory setting (default setting)
for this function is set as the front
passenger’s side mirror. The setting of
the driver’s side mirror operation can
be changed by a SUBARU dealer.
Contact your SUBARU dealer for de-
tails.
! Registration of memory position
with an access key fob (if
equipped)
s01aa020703
1. Adjust the memory position under the
following conditions.
. The parking brake is applied.
. The ignition switch is in the “LOCK”/
“OFF” position.
. The select lever is in the “P” position.
2. Hold the access key fob and press and
hold the “SET” button. Then press the “
”
button of the access key fob.
A chirp will sound once, and the memory
position is registered.
NOTE
When registering the seat position,
carry the access key that you want to
register with you. If you are carrying 2
or more access keys, registration may
not be possible.
– CONTINUED –
Front Seats
35
1
Seat, Seatbelt and SRS Airbags
Loading ...
Loading ...
Loading ...