Loading ...
Loading ...
Loading ...
(276,1)
北米Model "A2620BE-B" EDITED: 2022/ 6/ 24
door opener, it is advised to park
outside of the garage.
. Do not use HomeLink
®
with any
garage door opener that lacks
safety stop and reverse features
as required by U.S. federal safety
standards (this includes any gar-
age door opener model manufac-
tured before April 1, 1982). A
garage door that cannot detect
an object signaling the door to
stop and reverse does not meet
current U.S. federal safety stan-
dards.
. It is also recommended that a new
battery be placed in the hand-
held remote (garage door opener
remote) of the device for quicker
and more accurate training.
. Turn the ignition switch to the
“ON” or “ACC” position before
programming and/or operating
HomeLink
®
.
. Keep the hand-held remote (gar-
age door opener remote) of the
device you are programming for
use in other vehicles as well as
for future HomeLink
®
program-
ming. It is also suggested that
upon the sale of the vehicle, the
programmed HomeLink
®
buttons
be erased for security purposes.
Refer to “Erasing HomeLink
®
but-
tons” �P277.
! Programming a New HomeLink
®
button
s03ap100301
1) HomeLink indicator light
2) HomeLink
®
buttons
1. Press and release the HomeLink
®
button that you would like to program.
The HomeLink
®
indicator light will flash
orange slowly (if not, refer to “Erasing
HomeLink
®
buttons” �P277).
1) Garage door opener remote
2. Position the hand-held remote (garage
door opener remote) 1 to 3 inches (2 to 8
cm) away from the HomeLink
®
button that
you would like to program.
NOTE
Some hand-held remotes (garage door
opener remotes) may actually train
better at a distance of 6 to 12 inches
(15 to 30 cm). Keep this in mind if you
have difficulty with the programming
process.
Mirrors
274
Loading ...
Loading ...
Loading ...