Loading ...
Loading ...
Loading ...
14 15
EN EN
6. Clean the mop pad
How to Use
Note:
· If the robot is not on the base, please put it back before starting it.
· The robot will clean the mop pad before cleaning, please wait patiently until the
mop pad is cleaned.
· Do not manually move the base, fresh tank, waste tank, or washboard while mopping.
Note:
· To clean the mop pad at any time, press and hold the button on the base for 3
seconds to start cleaning.
· While cleaning the mop pad, if the water in the fresh tank is insucient or the waste tank
is full, the robot will send a voice prompt, or the app will send a notication.
· After the robot completes mopping, clean the waste tank in time to avoid mold or odor.
It is recommended to change the mop pad every 1 to 3 months.
After the robot completes cleaning and returns to charge, the base starts
cleaning and drying the mop pad.
3. Place the robot onto the base5. Return to self-clean
While mopping, the robot will return to the base to have the mop pad cleaned
as cleaning conditions set in the app. The robot resumes cleaning after the
mop pad is cleaned.
Press briey the
button. The robot starts from the base and mops the house
based on the optimal cleaning plan scheduled by the map.
4. Start mopping
How to Use
Functions in APP
1. Map management
The homepage of the app displays the current map. On this page, No-Go
Zone allows you to set zones to be avoided, and Map Management allows
you to modify the current map .
For optimal performance, follow the instructions below to clean and maintain
the robot and base.
2. Cleaning mode settings
Cleaning Mode on the homepage allows you to change the cleaning mode,
the suction power, as well as the humidity of the mop pad.
3. Self-cleaning settings
Self-Cleaning Settings on the homepage allows you to change the frequency
for self-cleaning and manually start a mop pad cleaning task or manually
start or end a mop pad drying task.
4. Product settings
The Settings page allows you to enable or disable device functions, congure
scheduled cleanup, or view cleaning history and device information.
Note:
· A map must be created before you use the room- or zone-based cleaning, and
manage maps.
· For more information about functions, check the corresponding interfaces or
guides in the app.
· The version of the app might have been updated, please follow the instructions
based on the current app version.
Routine Maintenance
Parts
PartMaintenance FrequencyReplacement Frequency
Dust BinClean it as needed/
Dust Bin FilterOnce every 2 weeksEvery 3 to 6 months
Fresh TankOnce every 2 weeks/
Fresh Tank Filter MediaOnce every 2 weeks/
Waste TankAfter each use/
WashboardOnce every 2 weeks/
Main BrushOnce every 2 weeksEvery 6 to 12 months
Side BrushOnce every 2 weeksEvery 3 to 6 months
Mop PadOnce every monthEvery 1 to 3 months
Universal WheelOnce every month/
Auxiliary WheelOnce every month/
LDS Laser SensorOnce every month/
Return-to-Base SensorOnce every month/
Cli SensorsOnce every month/
Signaling Area on BaseOnce every month/
Overow Sensors on BaseOnce every month/
Charging Contacts on RobotOnce every month/
Charging Contacts on BaseOnce every month/
Bottom of the RobotOnce every month/
Body of the BaseOnce every month/
Note: The replacement frequency will depend on your usage of the robot. If an
exception occurs due to special circumstances, the parts should be replaced.
Loading ...
Loading ...
Loading ...