1. Home
  2. Majestic
  3. Majestic BLDV400NSCSL User Manual
  4. Page 35

User Manual - Page 35

For BLDV400NSCSL.

Loading ...
Loading ...
Loading ...
20306741
35
BLDV7 Series Gas Fireplace
OPERATING INSTRUCTIONS - SIGNATURE COMMAND
FEATURES
Command Center
• EasyAccessFunctionOperationandSystemCongura-
tion
• OperationConrmation/FaultDiagnosticIndications(LED/
Buzzer)
• ON/OFF/HI/Med/Low Operation
• Optional Wall Mounting
Control Board
• Electronic Ignition
• Pilot Lockout safety feature
• Electric Power Regeneration from Thermopile to save
battery
• 6-hour Automatic Shut Down Option
• Convenient NG/LP Gas Type Conversion
• Standing Pilot/Intermittent pilot Conversion
• Previous settings Restoration Ability (Memory Off)
• Uninterrupted Operation During Power Outage (Automatic
Battery Backup)
• ON/OFF RF Remote Receiver
• Optional Transmitter Learn Capability
AC Module Board (Optional, requires TSFSC Remote)
• Easy Snap-on Design
• Embedded Compact 120 VAC Adapter with Auto Battery Back up Feature
• Remote Controlled 3-step Blower, Lighting, and On/Off Auxiliary AC Outputs
Transmitter (Optional)
TSFSC TSTSC TSMSC RTSC RMSC
ThreeFlameHeightSettings X X X X X
LowbatteryIndicationforTransmitter X X X X X
ChildProofLock-out X X X X X
LCDBacklight X X X X X
SecurityCodes16 X X X X X
Countdown6hrTimer X X X -- --
StandardThermostaticControlMode X X -- X --
Smart Mode
®
Thermostat (AutoFlame&BlowerModulation)X X -- -- --
ThreeBrightnessSettingsforLights X -- -- -- --
ThreeSpeedControlforBlower X -- -- -- --
On/OffAuxiliary X -- -- -- --
ProgrammableTimertoturnbloweronandoff X -- -- -- --
BATTERY INSTALLATION
The Command Center uses four (4) "AA" batteries as back up for power outages. The system can operate for approx-
imately six (6) months on battery power.
To Install Batteries (not included):
1. Press down the battery door tabs and pull out to remove battery door.
2. Install the batteries as indicated on Command Center.
3. Close battery door by snapping in place.
4. When the four (4) batteries are installed the system will operate without power.
5. The batteries should be replaced when the LED indicates low battery or at least once a year.
FP1917
Signature components
8/08
RF Receiver
ON/OFF
NG/LP
Conversion
To Thermopile
To Sensor
To Sparker
To Command
Center
To Stepper Motor
To Valve
Battery Door
Master Switch
ON
LED
OFF
Control Board
Command
Center
Figure 42 -
Signature Command System Components
6 V AC
Adapter
Loading ...
Loading ...
Loading ...