Loading ...
Loading ...
Loading ...
20306741
32
BLDV7 Series Gas Fireplace
FINAL INSTALLATION
4. Place the right upper log (#2) at an angle toward
the burner by matching the rectangular notch on the
bottom of this log with the rectangular protrusion on
the right front log (#3). The burned side of this log will
point toward the burner.
5. Place the left upper log (#6) at an angle by matching
the rectangular notch on the bottom of this log with
the rectangular protrusion on the side of the left front
log (#5). The split end should point toward the front.
6. Place the small twig (#4) by having the small pointed
endof thelogtoward the frontof the replaceand
the fat end resting evenly with the pointed ends of the
right and left front logs. Also, the notch on this log will
match the middle tong on the grate.
LOG PLACEMENT
1. Place the rear log (#1) in place by sliding it over the
rear pins on the right and the left.
2. Place the right front log (#3) over the burner and grate
by matching the hole on the bottom of the log with
the pin on the burner. Also match the cut-out on the
bottom of the log with the bars on the grate. NOTE:
When this log is in place pull towards the front.
3. Place the left front log (#5) over the burner and grate
by matching the holes on the bottom of the log with
the pin on the burner. Also match the cut-out on the
bottom of the log with bars on the grate. NOTE: When
this log is in place the branch on this log will lay over
the rear log on the left. Pull log forward.
Step 6 - Small Twig (#4)
LG534
BLDV small twig
8/08
Step 5 - Left Upper Log (#6)
LG534
Lt upper log
8/08
Step 4 - Right Upper Log (#2)
LG533
BLDV rt upper log
8/08
Step 1 - Rear Log (#1)
LG530
BLDV rear log
8/08
Step 2 - Right Front Log (#3)
LG530
BLDV rear log
8/08
LG532
BLDV Lt front log
8/08
Step 3 - Left Front Log (#5)
Loading ...
Loading ...
Loading ...