BLDV400NSCSL User Manual

Loading ...

20306741

BLDV7 Series Gas Fireplace

FINAL INSTALLATION

ROCK WOOL PLACEMENT

1. Place rock wool on burner to provide glowing

embers. For best results, pull the rock wool apart

intopiecesthesizeofadimeorsmaller.

2. Distribute one layer of rock wool to cover the burner.

Figure 49

3. Place the logs on the burner. Refer to Log Place-

ment below. Light unit and after 15 minutes, check

burnerameandglow.RefertoBurner Flame, in the

Cleaning and Maintenance section of this manual.

Iftheameisblueandonlyinthecenter,turnoffunit

and let cool. After unit cools, remove logs. If the back

holes are clear, add more rock wool to the center of the

burner.Replacelogsandcheckameagain.Saveleft

over rock wool to refresh when cleaning later. Too much

rockwoolcandisturbtheameandcausesootingon

the glass or logs.

HEARTH BRICK PLACEMENT

Place the hearth brick centered in front of burner and slide back until it hits the stops on the right

and left of burner.

FP2340

BDVL base

Figure 39 -

Placement of Rock Wool on Burner

Cover with

Rock Wool

Burner

FP2340

LG648

BLDV ember place

WARNING

Do not use the entire bag of rock wool to cover the

burner.Thiscouldcausetheametoburnpoorlyand

may lead to sooting.

Loading ...

User Manual - Page 30