Loading ...
Loading ...
Loading ...
Using the clockand timer.
Not all features are on all models.
Make sure the clock is set to the correct
time of day.
To Set the Clock
The clock must be set to the correct time of
day for the automatic oven timing functions
to work properly. The time of day cannot be
changed during a timed baking or self-
cleaning cycle.
[_ Touch the Clock pad.
[_ Touch the number pads.
Touch the number pads the same way you
read them. Forexample, to set 12:54,touch
the number pads 1, 2, 3 and 4 in that order.
If number pads are not touched within one
minute after you touch the Clock pad, the
display reverts to the original setting. If this
happens,touch the Clock pad and reenter
the time of day.
I_ Touch the Start pad until the time of
day shows in the display. This enters
the time and starts the clock.
Tocheck the time of dog when the displag
is showing other information, simplg touch
the Clock pod. The time of dog shows until
another pod is touched.
I KITCHEN
W T,MER]
ON/OFF
E]m S S !N
Thetimer is a minute timer only.
The Clear/Off pad does not affect
the timer.
To Set the Timer
Thetimer does not control oven operations.
Themaximum setting on the timer is 9 hours
and 59 minutes.
[]
[]
Touch the KitchenTimer On/Off pad.
Touch the number pads until the
amount of time you want shows in the
display. The maximum time that can be
entered in minutes is 59.Times more
than 59 minutes should be changed to
hours and minutes. For example, to
enter 90 minutes as 1 hour 30 minutes,
touch 1,3 and 0 inthat order.
Ifgou make a mistake,pressthe Kitchen
Timer On/Off pod and begin again.
%
Touch the Startpad. After pressing the
Startpad,Setdisappears; this tells you
the time is counting down, although the
display does not change until one
minute has passed.
When the timer reaches :00othe control
will beep 3 times followed by one beep
every 6 seconds until the Kitchen Timer
On/Off pad is touched.
The6-second tone can be canceled bg
following the steps in the Spedal features
of gout oven control section under Tones
at the Endof o Timed Cgcle.
To Reset the Timer
If the display is still showing the time
remaining, you may change it by touching
the Kitchen Timer On/OFFpad and then
touching the number pads until the time
you want appears in the display.
Ifthe remaining time is not in the display
(clock,@lay start or cooking time are in
the display), recall the remaining time by
touching the Kitchen Timer On/OFFpad
and then touching the number pads
to enter the new time you want.
To Cancel the Timer
Touchthe Kitchen Timer On/Off pad twice.
Power Outage
If o flashing time is in the displog,gou have
experiencedo power failure. Resetthe clock.
Touch the Clock pad once to reset.
Enterthe correct time of day by touching
the appropriate number pads.Touch
the Startpad.
16
Loading ...
Loading ...
Loading ...