Loading ...
Loading ...
Loading ...
EN
28
Cleaning and Maintenance
www.bora.com
8.3 Replacing the activated
charcoal filter
In recirculation mode, an additional activated charcoal
filter is used. The activated charcoal filter absorbs cooking
odours. The activated charcoal filter is installed on the
plinth fan or the duct system.
INFO Regularly replace the activated charcoal filter.
The service life can be found in the operating
instructions for the relevant activated charcoal
filter.
INFO You can obtain activated charcoal filters from
your specialist supplier or by contacting BORA
via the website at www.bora.com.
A description of how to replace the activated charcoal
filter can be found in its operating instructions.
Reset the filter service display
(see the Device description section).
Cleaning in the dishwasher
Rinse the cover plates and stainless steel grease filter
with a rinsing program at maximum 65 °C.
The stainless steel grease filter absorbs the greasy
particles from cooking vapours.
If it is no longer possible to clean the stainless steel
grease filter completely, it must be replaced.
8.2.3 Installing the cover plates and
stainless steel grease filter
Fig. 8.3 Inserting the stainless steel grease lter
Insert the stainless steel grease filter into the opening
in the cooktop extractor.
Ensure that the stainless steel grease filter is
positioned in the gap in the cooktop extractor
housing; it does not need to be locked into place.
Fig. 8.4 Inserting the cover plates
Insert the cover plates.
Loading ...
Loading ...
Loading ...