Loading ...
Loading ...
Loading ...
EN
24
Installation
For connections to the Home In connection clamp, no
ferrules may be used.
Clamp the connection cable in the strain relief clamp
[4] in accordance with the wire cross section used.
INFO If external switching devices are connected
both to the Home In and Home Out interfaces,
both cables should be secured with the strain
relief clamp [4].
Remove the relevant snap-out element [2] in the
plastic housing of the control unit.
1
2
Fig. 6.33 Home Out contacts with strain relief
[1] Strain relief clamp
[2] Snap-out element for cable feed
Check that the connection cables have been correctly
installed and securely connected.
Close the cover on the control unit.
Make sure that the cable is not damaged.
Switch on the main switch/automatic circuit breaker.
Establishing the power connection
Connect the power supply cable for the control unit to
the power supply.
Put the cooktop extractor into operation (see the
Operation section).
Check that all the functions are working correctly.
6.8 Handover to user
Once installation is complete:
Explain the main functions to the user.
Explain all safety-related aspects of operation and
handling to the user.
Provide the user with the accessories and operating
and installation instructions for safe storage.
www.bora.com
Loading ...
Loading ...
Loading ...