Loading ...
Loading ...
Loading ...
EN
19
Installation
www.bora.com
1
2
3
Fig. 6.19 Shortening the substructure module
[1] Substructure module
[2] Cut marks
[3] Fine saw
Prepare the plinth fan by attaching the sealing tape
depending on the installation situation.
Secure the sealing tape to the inlet nozzle.
Fig. 6.20 Sealing tape position for installation with a round duct
Secure the sealing tape on the outlet nozzle.
Fig. 6.21 Sealing tape position for installation with a transition
piece (shallow duct)
1
2
3
Fig. 6.17 Shortening the silence module
[1] Silence module
[2] Cut marks
[3] Fine saw
Now place the (curved or straight) transition piece and
the silence module together on the plinth fan.
2
3
5
4
1
Fig. 6.18 Assembly
[1] Protective grid
[2] Silence module
[3] Transition piece (curved or straight)
[4] Universal plinth fan inlet nozzle
[5] Universal plinth fan
Saw out the necessary cut-outs for the ducting in the
rear panel of the floor unit.
Depending on the installation situation, adjust the
levelling feet on the floor unit as necessary.
Now adapt the substructure module to the available
depth of the worktop by shortening the substructure
module at the cut marks using a fine saw.
Loading ...
Loading ...
Loading ...