Loading ...
Loading ...
Loading ...
EN
26
Operation
www.bora.com
7.2 Pay attention to the filter service
display
If
F
appears on the fan display, this means the service
life of the activated charcoal filter has expired (with
recirculation only) and the stainless steel grease filter
needs to be thoroughly cleaned.
Press the or button to set the desired power
level and switch to the normal operating mode.
Changing the filter
Switch off the cooktop extractor.
Observe all the information provided in the Cleaning
section.
Replace the activated charcoal filter.
Clean the stainless steel grease filter.
Resetting the filter service display
If the activated charcoal filter has been replaced and the
stainless steel grease filter has been cleaned, it will be
necessary to reset the filter service display.
Switch off the cooktop extractor.
F
is displayed in the fan indicator.
Simultaneously press and for at least 5 seconds
until a
0
is permanently displayed in the fan indicator.
The filter service display has been reset.
The filter service display can only be reset if a filter
service is due after 200 operating hours.
7.2.1 Closing the cover plates
After switching off the cooktop extractor, close it with
the two cover plates.
Loading ...
Loading ...
Loading ...